Oorspronkelijke prijs was: € 5,79.€ 2,90Huidige prijs is: € 2,90. incl.: € 3,51
6003-Z-C3 FAG | EAN: 4012801163576 | (GTIN14: 04012801163576)
Uitverkocht
Binnen enkele seconden geverifieerd om op factuur te kunnen betalen.
6003-Z-C3 | 0167170820030 | EAN:4012801163576
Click here for factory productpage:6003-Z-C3 (Medias Schaeffler)
| Gewicht | 0,038 kg |
|---|---|
| Structure group name | Deep groove ball bearings |
| Brand | FAG |
| EAN code | 4012801163576 |
| UNSPSC codeUNSPSC is a taxonomy of products and services for use in eCommerce, managed by GS1 US. It is a four-level hierarchy coded as an eight-digit number, two digits for each of the four hierarchical levels. | 31-17-15-02 |
| eClass codeA eClass-code is a worldwide reference-data standard for the classification and unambiguous description of products and services established in industry, commerce, trade, and the service sector. eClass consists of a four-level hierarchy of classification classes (i.e. a tree structure). 8-digit class code (in ECLASS called: CodedName) consists of two digits for each of the four hierarchical levels. | 23-05-08-01 |
| eClass name | Deep groove ball bearing |
| Bore diameterInner diameter of the bearing | 17 mm |
| Outside diameter | 35 mm |
| Width | 10 mm |
| Radial internal clearanceBearing internal clearance is defined as the total distance through which one bearing ring can be moved relative to the other in the radial direction (radial internal clearance) or in the axial direction (axial internal clearance) | C3Internal clearance larger than CN |
| Sealing type | Non-contact seal |
| Sealing | Shield on one side |
| Seal Suffix | Z (Steel Shield) |
| Seal Suffix short | -Z |
| Basic dynamic load ratingThe basic dynamic load rating Cr or Ca is the load which a bearing can theoretically endure for a basic rating life of one million revolutions. This is expressed as pure radial (Cr) load for radial bearings and pure axial (Ca) load for thrust bearings | 6.4 kN |
| Basic static load ratingThe basic static load rating C0r or C0a is defined as the load that results in a certain value of contact stress at the centre of contact of the most heavily loaded rolling element/raceway. C0r is indicate for radial load-, C0a is indicate for radial load rating. | 3.25 kN |
| Limiting speed | 31000 r/min |
| Reference speed | 20300 r/min |
| Bore type | Cylindrical |
| CageSteel cages can be used at operating temperatures up to 300 °C (570 °F) Sheet steel cages Stamped sheet steel cages are made of low carbon steel / Machined steel cages: Machined steel cages are normally made of non-alloyed structural steel / Brass Cages, Brass cages can be used at operating temperatures up to 250 °C (480 °F). / Sheet brass cages: Stamped sheet brass cages are used for some small and medium-size bearings / Machined brass cages: Most brass cages are machined from cast or wrought brass | Sheet metal |
| Lubricant | Bearing not greased |
| Tolerance class | Normal (PN) |
Deze tabel bevat technische gegevens voor dit Schaeffler product, verdeeld in secties zoals inbouwmaten, berekeningsgegevens, tekeningmaatgegevens en bijvoorbeeld materialen en montage-informatie.
 |
||
| Je huidige product variant: 6003-Z-C3 | ||
|---|---|---|
| Beschrijving | Parameter | Waarde |
| Afdichting | Z | Contactloze afscherming aan één kant |
| Kooi | JN | Plaatstalen |
| Tolerantieklasse | PN | Normaal (PN) |
| Dimensionele / hittestabilisatie | SN | Ringen maatvast gestabiliseerd tot 120° |
| Smeermiddel | Without | Niet gesmeerd |
| Radiale speling | C3 (Group 3) | Inwendige speling groter dan CN |
| Type boring | Z | Cilindrisch |
  |
||
| Belangrijkste afmetingen en prestatiegegevens | ||
| Parameter | Waarde | Beschrijving |
| d | 17mm | Boring diameter |
| D | 35mm | Buitendiameter |
| B | 10mm | Breedte |
| Cr | 6.4 kN | Dynamische basisbelasting, radiaal |
| C0r | 3.25 kN | Statische basisbelasting, radiaal |
| Cur | 0.162 kN | Vermoeiingsbelastingslimiet, radiaal |
| nG | 31000 r/min | Maximaal toerental |
| nϑr | 20300 r/min | Referentietoerental |
| ≈m | 37.553g | Gewicht |
| Montageafmetingen | ||
| Parameter | Waarde | Beschrijving |
| da min | 19mm | Minimale diameter asstap |
| Da max | 33mm | Maximale diameter behuizingsschouder |
| ra max | 0.3mm | Maximale afrondingsradius |
| Afmetingen | ||
| Parameter | Waarde | Beschrijving |
| rmin | 0.3mm | Minimale afschuiningsmaat |
| D1 | 29.51mm | Schouderdiameter buitenring |
| D2 | 30.81mm | Kaliberdia buitenring |
| d1 | 22.65mm | Schouderdiameter binnenring |
| Temperatuurbereik | ||
| Parameter | Waarde | Beschrijving |
| Tmin | -30°C | Minimale bedrijfstemperatuur |
| Tmax | 120°C | Maximale bedrijfstemperatuur |
| Berekeningsfactoren | ||
| Parameter | Waarde | Beschrijving |
| f0 | 14.3 | Berekeningsfactor |
This table contains technical specifications for this product, organized into sections such as installation dimensions, calculation data, drawing dimensions, and information on materials and installation.
|
|
||
| Your current product variant | ||
|---|---|---|
| Parameter | Value | Description |
| Sealing | Z | Non-contact shield on one Side |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (PN) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
| Bore type | Z | Cylindrical |
|
|
||
| Main Dimensions & Performance Data | ||
| Parameter | Value | Description |
| d | 17mm | Bore diameter |
| D | 35mm | Outside diameter |
| B | 10mm | Width |
| Cr | 6,400N | Basic dynamic load rating, radial |
| C0r | 3,250N | Basic static load rating, radial |
| Cur | 162N | Fatigue load limit, radial |
| nG | 31,0001/min | Limiting speed |
| nϑr | 20,3001/min | Reference speed |
| ≈m | 37.553g | Weight |
| Mounting dimensions | ||
| Parameter | Value | Description |
| da min | 19mm | Minimum diameter shaft shoulder |
| Da max | 33mm | Maximum diameter of housing shoulder |
| ra max | 0.3mm | Maximum fillet radius |
| Dimensions | ||
| Parameter | Value | Description |
| rmin | 0.3mm | Minimum chamfer dimension |
| D1 | 29.51mm | Shoulder diameter outer ring |
| D2 | 30.81mm | Caliber diameter outer ring |
| d1 | 22.65mm | Shoulder diameter inner ring |
| Temperature range | ||
| Parameter | Value | Description |
| Tmin | -30°C | Operating temperature min. |
| Tmax | 120°C | Operating temperature max. |
| Calculation factors | ||
| Parameter | Value | Description |
| f0 | 14.3 | Calculation factor |
Onze producten leveren wij zorgvuldig en robuust verpakt in de gehele Benelux.
Elke bestelling wordt met uiterste zorg verpakt om ervoor te zorgen dat jouw bestelling
snel, duurzaam en in perfecte staat arriveert.
Onze betrouwbare verzendpartners zorgen voor een snelle en probleemloze levering in de gehele Benelux. Mocht er toch iets niet geheel naar wens zijn verlopen, laat het ons zo spoedig mogelijk weten.
Ondanks onze grote zorg kan het helaas voorkomen dat je bestelling niet helemaal naar wens is. Geen zorgen, je kunt eenvoudig het retourformulier invullen om je bestelling terug te sturen. Dit geldt ook als je per ongeluk het verkeerde product hebt besteld – we helpen je graag met een snelle en soepele retourprocedure. Dit begint met het invullen van het retourformulier. Klik hier om te starten.
Onze retourvoorwaarden staan vermeld in onze Terms and Conditions.
Ook staan veel voorkomende vragen in de Frequently asked questions.
Unfortunately, despite our great care, it may happen that your order is not completely satisfactory. Don't worry, you can easily fill out the return form to return your order. This also applies if you have accidentally ordered the wrong product - we are happy to help you with a quick and smooth return process. This starts with filling out the return form. Click here to start.
Our return policy is listed in our Terms and Conditions.
Also are common quetions included in the Frequently asked questions.
In stock
Oorspronkelijke prijs was: € 10,59.€ 3,39Huidige prijs is: € 3,39. incl.: € 4,10In stock
Oorspronkelijke prijs was: € 18,61.€ 5,96Huidige prijs is: € 5,96. incl.: € 7,21Out of stock
Oorspronkelijke prijs was: € 34,79.€ 11,13Huidige prijs is: € 11,13. incl.: € 13,47In stock
Oorspronkelijke prijs was: € 38,64.€ 12,36Huidige prijs is: € 12,36. incl.: € 14,96Out of stock
Oorspronkelijke prijs was: € 7,04.€ 2,25Huidige prijs is: € 2,25. incl.: € 2,72Out of stock
Oorspronkelijke prijs was: € 93,77.€ 42,20Huidige prijs is: € 42,20. incl.: € 51,06Out of stock
Oorspronkelijke prijs was: € 253,60.€ 114,12Huidige prijs is: € 114,12. incl.: € 138,09Out of stock
Oorspronkelijke prijs was: € 14,82.€ 6,67Huidige prijs is: € 6,67. incl.: € 8,07
Ball Bearings
Roller bearings
Spherical roller bearings![Toroidal roller bearings [CARB]](https://thegearhub.eu/wp-content/uploads/2023/11/Toroidal-roller-bearing_Menu-150x150.jpg)
Toroidal roller bearings [CARB]
Cylindrical roller bearings
Needle roller bearings
Tapered roller bearings
Washers
Combined needle roller / angular contact ball bearings
Combined needle roller / cylindrical roller thrust bearings
Combined needle roller / thrust ball bearings
Track rollers
Thrust bearings
Plain bearings
Spherical plain bearings and rod ends
Mounted bearings and housings
Super-precision bearings
Bearings accessories
Agricultural bearings
Uitverkocht
Deep Groove Ball Bearings
Insert Bearings
Angular Contact Ball Bearings
Self-aligning ball bearings
Ball thrust roller
Cylindrical thrust roller
Needle thrust roller
Spherical thrust roller
Cam rollers (Yoke-type track rollers)
Cam followers (Stud-type track rollers)
Support rollers (Yoke-type track rollers)
Combined needle roller / thrust ball bearings
Super precision-cylindrical-roller-bearings
Super precision-angular-contact-thrust-ball-bearings
Pillow block
Flanged square
Flanged Oval
Flanged Round
3-bolt bracket
Triangular
Pillow block housing only
Flanged Square housing only
Flanged Oval housing only
Flanged Round housing only
Take-up housing only
Plummer (pillow) block (split)
Plummer/pillow block (split)
Flanged non-split housing Square & Triangle
Roller Bearing Units
Deep groove ball bearings
Angular contact ball bearings
Inner rings
Outer rings
Tapered roller thrust bearings
Cam rollers (Yoke-type track rollers)
Bushings, thrust washers and strips
Radial spherical plain bearings
Rod ends
Angular contact spherical plain bearings
Ball bearing units
Housings for insert bearings
Bearing housings
Bearing housing accessories
Bearing unit accessories
Super-precision angular contact ball bearings
Super-precision angular contact thrust ball bearings
Lock nuts and locking devices
Adapter sleeves
Withdrawal sleeves
Sphered seat washers
Angle rings (L-shaped thrust collars)
Cylindrical rollers
Miniature ball bearings