Oorspronkelijke prijs was: € 201,60.€ 90,72Huidige prijs is: € 90,72. incl.: € 109,77
210-ZNR SKF | EAN: 7316576679742 | (GTIN14: 07316576679742)
2 op voorraad
Binnen enkele seconden geverifieerd om op factuur te kunnen betalen.
Single row deep groove ball bearings with filling slots, a snap ring, and shields on one or both sides, accommodate more balls than standard deep groove ball bearings. They are of a simple, yet versatile, design and are robust in operation, requiring little maintenance. They can accommodate radial and axial loads in both directions. They have a higher radial load carrying capacity than the corresponding bearings without filling slots but have a limited axial load carrying capacity due to the filling slots. The snap ring, fitted in an annular groove in the outer ring, facilitates axial location of the bearings within their housings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
| Gewicht | 0,5278 kg |
|---|---|
| Afmetingen | 10,6 × 10,4 × 2,5 cm |
| Structure group name | Deep groove ball bearings |
| Short description | Deep groove ball bearing with filling slots and integral sealing |
| Brand | SKF |
| Pack Code | Single package |
| EAN code | 7316576679742 |
| Pack gross weight | 527.8 g |
| Pack height | 106 mm |
| Pack length | 104 mm |
| Pack width | 25 mm |
| Pack volume | 275.6 cm3 |
| Product net weight | 514.1 g |
| Products per pack | 1 |
| UNSPSC codeUNSPSC is a taxonomy of products and services for use in eCommerce, managed by GS1 US. It is a four-level hierarchy coded as an eight-digit number, two digits for each of the four hierarchical levels. | 31-17-15-04 |
| UNSPSC name | Ball bearings |
| eClass codeA eClass-code is a worldwide reference-data standard for the classification and unambiguous description of products and services established in industry, commerce, trade, and the service sector. eClass consists of a four-level hierarchy of classification classes (i.e. a tree structure). 8-digit class code (in ECLASS called: CodedName) consists of two digits for each of the four hierarchical levels. | 23-05-08-01 |
| eClass name | Deep groove ball bearing |
| Bore diameterInner diameter of the bearing | 50 mm |
| Outside diameter | 90 mm |
| Width | 20 mm |
| Sealing type | Non-contact |
| Sealing | Shield on one side |
| Basic dynamic load ratingThe basic dynamic load rating Cr or Ca is the load which a bearing can theoretically endure for a basic rating life of one million revolutions. This is expressed as pure radial (Cr) load for radial bearings and pure axial (Ca) load for thrust bearings | 39.1 kN |
| Basic static load ratingThe basic static load rating C0r or C0a is defined as the load that results in a certain value of contact stress at the centre of contact of the most heavily loaded rolling element/raceway. C0r is indicate for radial load-, C0a is indicate for radial load rating. | 34.5 kN |
| Limiting speed | 8000 r/min |
| Reference speed | 13000 r/min |
| Bore type | Cylindrical |
| CageSteel cages can be used at operating temperatures up to 300 °C (570 °F) Sheet steel cages Stamped sheet steel cages are made of low carbon steel / Machined steel cages: Machined steel cages are normally made of non-alloyed structural steel / Brass Cages, Brass cages can be used at operating temperatures up to 250 °C (480 °F). / Sheet brass cages: Stamped sheet brass cages are used for some small and medium-size bearings / Machined brass cages: Most brass cages are machined from cast or wrought brass | Sheet metal |
| Locating feature outer ring | Snapring (fitted) |
| Number of rows | 1 |
| Relubrication feature | Without |
| Tolerance class | Normal |
| Matched arrangementAngular contact ball bearing can be arrangement in different sets. ----- Back-to-back (O) or Face-to-Face (X) or Tandem (>>) ----- The O- and X-arrangements of two precision angular contact ball bearings makes it possible to take up axial loads in both directions. High axial loads in only one direction are supported by a tandem arrangement. | No |
| Filling slots | With |
| Coating | Without |
| Material bearing | Bearing steel |
Deze tabel bevat de belangrijkste productspecificaties voor SKF-210-ZNR, waaronder afmetingen, prestaties, eigenschappen en logistieke gegevens.
| Afmetingen | |
|---|---|
| Eigenschap | Waarde |
| Boring | 50 mm |
| Buitendiameter | 90 mm |
| Breedte | 20 mm |
| Prestaties | |
| Eigenschap | Waarde |
| Dynamisch draaggetal | 39.1 kN |
| Statisch draaggetal | 34.5 kN |
| Referentietoerental | 13 000 r/min |
| Grenstoerental | 8 000 r/min |
| Eigenschappen | |
| Eigenschap | Waarde |
| Vulopeningen | Met |
| Aantal rijen | 1 |
| Positiekenmerk, lagerbuitenring | Borgring (gemonteerd) |
| Type boring | Cilindrisch |
| Kooi | Plaatmetaal |
| Gepaarde opstelling | Nee |
| Radiale speling | CN |
| Materiaal, lager | Lagerstaal |
| Coating | Zonder |
| Afdichtingen | Beschermplaatje aan één kant |
| Type afdichting | Niet-slepend |
| Smeermiddel | Geen |
| Nasmeer kenmerk | Zonder |
| Logistiek | |
| Eigenschap | Waarde |
| Nettogewicht van het product | 0.514 kg |
| eClass code | 23-05-08-01 |
| UNSPSC-code | 31171504 |
Deze tabel bevat technische gegevens voor dit product, verdeeld in secties zoals inbouwmaten, berekeningsgegevens, tekeningmaatgegevens en bijvoorbeeld materialen en montage-informatie.
| Afmetingen | ||
|---|---|---|
| Parameter | Waarde | Beschrijving |
| d | 50 mm | Boring |
| D | 90 mm | Buitendiameter |
| B | 20 mm | Breedte |
| d1 | ≈ 62.51 mm | Diameter schouder |
| D2 | ≈ 81.61 mm | Uitsparingsdiameter |
| D3 | 86.79 mm | Diameter borgringgroef |
| D4 | 96.5 mm | Buitendiameter borgring |
| b | 2.7 mm | Breedte borgringgroef |
| C | 3.28 mm | Afstand van zijvlak buitenring tot borgringgroef |
| f | 2.46 mm | Breedte borgring |
| r0 | max. 0.6 mm | Onderste radius van borgringgroef |
| r1,2 | min. 1.1 mm | Afmeting afschuining |
|
|
||
| Inbouwmaten | ||
| Parameter | Waarde | Beschrijving |
| da | min. 57 mm | Diameter aanlegvlak as |
| da | max. 62.4 mm | Diameter aanlegvlak as |
| Da | max. 83 mm | Diameter aanlegvlak lagerhuis |
| Db | min. 98 mm | Diameter borgring-uitsparing in lagerhuis |
| ba | min. 3 mm | Breedte borgring-uitsparing in het huis |
| Ca | max. 5.74 mm | Afstand van zijvlak buitenring tot achtervlak borgring |
| ra | max. 1 mm | Afrondingsstraal as of lagerhuis |
| Berekeningsgegevens | ||
| Parameter | Waarde | Beschrijving |
| C | 39.1 kN | Dynamisch draaggetal |
| C0 | 34.5 kN | Statisch draaggetal |
| Pu | 1.46 kN | Vermoeiingsbelastinggrens |
| 13 000 r/min | Referentietoerental | |
| 8 000 r/min | Grenstoerental | |
| kr | 0.04 | Minimale belastingfactor |
| Meegeleverde producten | ||
| Beschrijving | Waarde | |
| Borgring | SP 90 | |
Onze producten leveren wij zorgvuldig en robuust verpakt in de gehele Benelux.
Elke bestelling wordt met uiterste zorg verpakt om ervoor te zorgen dat jouw bestelling
snel, duurzaam en in perfecte staat arriveert.
Onze betrouwbare verzendpartners zorgen voor een snelle en probleemloze levering in de gehele Benelux. Mocht er toch iets niet geheel naar wens zijn verlopen, laat het ons zo spoedig mogelijk weten.
Ondanks onze grote zorg kan het helaas voorkomen dat je bestelling niet helemaal naar wens is. Geen zorgen, je kunt eenvoudig het retourformulier invullen om je bestelling terug te sturen. Dit geldt ook als je per ongeluk het verkeerde product hebt besteld – we helpen je graag met een snelle en soepele retourprocedure. Dit begint met het invullen van het retourformulier. Klik hier om te starten.
Onze retourvoorwaarden staan vermeld in onze Terms and Conditions.
Ook staan veel voorkomende vragen in de Frequently asked questions.
Unfortunately, despite our great care, it may happen that your order is not completely satisfactory. Don't worry, you can easily fill out the return form to return your order. This also applies if you have accidentally ordered the wrong product - we are happy to help you with a quick and smooth return process. This starts with filling out the return form. Click here to start.
Our return policy is listed in our Terms and Conditions.
Also are common quetions included in the Frequently asked questions.
In stock
Oorspronkelijke prijs was: € 8,51.€ 2,72Huidige prijs is: € 2,72. incl.: € 3,29In stock
Oorspronkelijke prijs was: € 7,04.€ 2,25Huidige prijs is: € 2,25. incl.: € 2,72In stock
Oorspronkelijke prijs was: € 124,58.€ 39,87Huidige prijs is: € 39,87. incl.: € 48,24In stock
Oorspronkelijke prijs was: € 162,36.€ 51,96Huidige prijs is: € 51,96. incl.: € 62,87In stock
Oorspronkelijke prijs was: € 2.323,69.€ 743,58Huidige prijs is: € 743,58. incl.: € 899,73In stock
Oorspronkelijke prijs was: € 31,36.€ 14,11Huidige prijs is: € 14,11. incl.: € 17,07In stock
Oorspronkelijke prijs was: € 14,82.€ 6,67Huidige prijs is: € 6,67. incl.: € 8,07In stock
Oorspronkelijke prijs was: € 66,25.€ 29,81Huidige prijs is: € 29,81. incl.: € 36,07
Ball Bearings
Roller bearings
Spherical roller bearings![Toroidal roller bearings [CARB]](https://thegearhub.eu/wp-content/uploads/2023/11/Toroidal-roller-bearing_Menu-150x150.jpg)
Toroidal roller bearings [CARB]
Cylindrical roller bearings
Needle roller bearings
Tapered roller bearings
Washers
Combined needle roller / angular contact ball bearings
Combined needle roller / cylindrical roller thrust bearings
Combined needle roller / thrust ball bearings
Track rollers
Thrust bearings
Plain bearings
Spherical plain bearings and rod ends
Mounted bearings and housings
Super-precision bearings
Bearings accessories
Agricultural bearings
2 op voorraad
Deep Groove Ball Bearings
Insert Bearings
Angular Contact Ball Bearings
Self-aligning ball bearings
Ball thrust roller
Cylindrical thrust roller
Needle thrust roller
Spherical thrust roller
Cam rollers (Yoke-type track rollers)
Cam followers (Stud-type track rollers)
Support rollers (Yoke-type track rollers)
Combined needle roller / thrust ball bearings
Super precision-cylindrical-roller-bearings
Super precision-angular-contact-thrust-ball-bearings
Pillow block
Flanged square
Flanged Oval
Flanged Round
3-bolt bracket
Triangular
Pillow block housing only
Flanged Square housing only
Flanged Oval housing only
Flanged Round housing only
Take-up housing only
Plummer (pillow) block (split)
Plummer/pillow block (split)
Flanged non-split housing Square & Triangle
Roller Bearing Units
Deep groove ball bearings
Angular contact ball bearings
Inner rings
Outer rings
Tapered roller thrust bearings
Cam rollers (Yoke-type track rollers)
Bushings, thrust washers and strips
Radial spherical plain bearings
Rod ends
Angular contact spherical plain bearings
Ball bearing units
Housings for insert bearings
Bearing housings
Bearing housing accessories
Bearing unit accessories
Super-precision angular contact ball bearings
Super-precision angular contact thrust ball bearings
Lock nuts and locking devices
Adapter sleeves
Withdrawal sleeves
Sphered seat washers
Angle rings (L-shaped thrust collars)
Cylindrical rollers
Miniature ball bearings