7028CD/P4ADGB SKF | EAN: 7316577089540 | (GTIN14: 07316577089540)
Binnen enkele seconden geverifieerd om op factuur te kunnen betalen.
These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings are available in a variety of arrangements. They are designed for high-load capacity and relatively high speed operation and, compared to the equivalent SKF B and E design high-speed bearings, are best suited for heavier loads.
| Gewicht | 7,67 kg |
|---|---|
| Afmetingen | 22,8 × 21,8 × 9 cm |
| Structure group name |
Super-precision angular contact ball bearings |
| Short description |
D design ,high-capacity ,Matched set of two super-precision ,single row angular contact ball bearings |
| Brand |
SKF |
| Pack Code |
Single package |
| EAN code |
7316577089540 |
| Pack gross weight |
7.67 kg |
| Pack height |
228 mm |
| Pack length |
218 mm |
| Pack width |
90 mm |
| Pack volume |
4.473 dm3 |
| Product net weight |
6.71 kg |
| Products per pack |
1 |
| UNSPSC code UNSPSC is a taxonomy of products and services for use in eCommerce, managed by GS1 US. It is a four-level hierarchy coded as an eight-digit number, two digits for each of the four hierarchical levels. |
31-17-15-31 |
| UNSPSC name |
Angular contact bearing |
| eClass code A eClass-code is a worldwide reference-data standard for the classification and unambiguous description of products and services established in industry, commerce, trade, and the service sector. eClass consists of a four-level hierarchy of classification classes (i.e. a tree structure). 8-digit class code (in ECLASS called: CodedName) consists of two digits for each of the four hierarchical levels. |
23-05-08-04 |
| eClass name |
Spindle bearing |
| Bore diameter Inner diameter of the bearing |
140 mm |
| Outside diameter |
210 mm |
| Width |
66 mm |
| Sealing |
Without |
| Basic dynamic load rating The basic dynamic load rating Cr or Ca is the load which a bearing can theoretically endure for a basic rating life of one million revolutions. This is expressed as pure radial (Cr) load for radial bearings and pure axial (Ca) load for thrust bearings |
247 kN |
| Basic static load rating The basic static load rating C0r or C0a is defined as the load that results in a certain value of contact stress at the centre of contact of the most heavily loaded rolling element/raceway. C0r is indicate for radial load-, C0a is indicate for radial load rating. |
247 kN |
| Tolerance class |
P4AU |
| Contact angle The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis |
15° |
| Matched arrangement Angular contact ball bearing can be arrangement in different sets. ----- Back-to-back (O) or Face-to-Face (X) or Tandem (>>) ----- The O- and X-arrangements of two precision angular contact ball bearings makes it possible to take up axial loads in both directions. High axial loads in only one direction are supported by a tandem arrangement. |
Universal matching |
| QTY in matched set The number of bearings in one matched set angular contact bearings. |
2 |
| Contact type |
Normal contact (two-point contact) |
| Matched(ax.clearance/preload |
Light preload |
| Coating |
Without |
| Material bearing |
Bearing steel |
| SKF performance class |
SKF Standard |
| Afmetingen | ||
| Eigenschap naam | Waarde | |
|---|---|---|
| Boring | 140 mm | |
| Buitendiameter | 210 mm | |
| Breedte | 66 mm | |
| Contacthoek | 15 ° | |
| Prestaties | ||
| Eigenschap naam | Waarde | |
| Dynamisch draaggetal | 247 kN | |
| Statisch draaggetal | 335 kN | |
| Opmerking | Neem contact op met SKF voor de mogelijke toerentallen | |
| Eigenschappen | ||
| Eigenschap naam | Waarde | |
| Contacttype | Normaal contact (tweepuntscontact) | |
| Aantal rijen | 2 | |
| Type ring | Binnen- en buitenringen uit één stuk | |
| Ontwerp | Hoge capaciteit D | |
| Universeel gepaard lager | Ja, O-opstelling (), X-opstelling (>>) | |
| Gepaarde opstelling | Universeel passend | |
| Aantal lagers in gepaarde set | 2 | |
| Gepaarde conditie (axiale speling/voorspanning) | Lichte voorspanning | |
| Tolerantieklasse | P4A | |
| Materiaal, lager | Lagerstaal | |
| Coating | Zonder | |
| Afdichtingen | Zonder | |
| Smeermiddel | Geen | |
| Indicative product carbon footprint to manufacture | 24.2 kg CO2e | |
| Logistiek | ||
| Eigenschap naam | Waarde | |
| Nettogewicht van het product | 6.71 kg | |
| eClass code | 23-05-08-04 | |
| UNSPSC-code | 31171531 | |
Technische tekening -1 SKF-7028-CD/P4ADGB Afmetingen
Technische tekening -2 SKF-7028-CD/P4ADGB Inbouwmaten
Technische tekening -3 SKF-7028-CD/P4ADGB
| Beschrijving | Waarde | |
|---|---|---|
| Universeel gepaard(e) lager(s) | Ja, O-opstelling (), X-opstelling (>>) | |
| Afmetingen | ||
| Parameter | Waarde | Beschrijving |
| d | 140 mm | Boring |
| D | 210 mm | Buitendiameter |
| B | 33 mm | Breedte |
| B | 66 mm | Breedte |
| d1 | 161.6 mm | Diameter asborst binnenring (groot zijvlak) |
| d2 | 161.6 mm | Diameter asborst binnenring (klein zijvlak) |
| D1 | 188.4 mm | Diameter schouder buitenring (groot zijvlak) |
| r1,2 | min. 2 mm | Afmeting afschuining |
| r3,4 | min. 1 mm | Afmeting afschuining |
| a | 40.1 mm | Afstand van zijvlak tot drukpunt |
| Inbouwmaten | ||
| Parameter | Waarde | Beschrijving |
| da | min. 149 mm | Diameter aanlegvlak as |
| db | min. 149 mm | Diameter aanlegvlak as |
| Da | max. 201 mm | Diameter aanlegvlak lagerhuis |
| Db | max. 205 mm | Diameter aanlegvlak lagerhuis |
| ra | max. 2 mm | Afrondingsstraal |
| rb | max. 1 mm | Afrondingsstraal |
| dn | 166.3 mm | Positie van oliespuitmond |
| Berekeningsgegevens | ||
| Parameter | Waarde | Beschrijving |
| C | 247 kN | Dynamisch draaggetal |
| C | 247 kN | Dynamisch draaggetal |
| C0 | 335 kN | Statisch draaggetal |
| C0 | 335 kN | Statisch draaggetal |
| Pu | 10.6 kN | Vermoeiingsbelastinggrens |
| Pu | 10.6 kN | Vermoeiingsbelastinggrens |
| To be calculated: Single bearing (6700) x speed reduction factor (see table below) | Bereikbaar toerental voor vetsmering | |
| To be calculated: Single bearing (10000) x speed reduction factor (see table below) | Bereikbaar toerental voor olie-luchtsmering | |
| α | 15 ° | Contacthoek |
| Dw | 22.225 mm | Kogeldiameter |
| i | 2 | Aantal rijen |
| i | 2 | Aantal rijen |
| z | 22 | Aantal kogels (per lager) |
| Gref | 45 cm³ | Referentiehoeveelheid smeervet (per lager) |
| VOORSPANNING EN STIJFHEID (X- OF O-OPSTELLING) | ||
| Parameter | Waarde | Beschrijving |
| B | Voorspanningsklasse | |
| G | 1 140 N | Voorspanning |
| 206 N/µm | Axiale stijfheid | |
| CORRECTION FACTORS FOR PRELOAD CALCULATION | ||
| Parameter | Waarde | Beschrijving |
| f | 1.16 | Correctiefactor is afhankelijk van lagerserie en -afmeting |
| f1 | 1 | Correctiefactor afhankelijk van contacthoek |
| f2B | 1.02 | Correctiefactor, voorspanning klasse B |
| fHC | 1 | Correctiefactor voor hybride lagers |
| FACTORS FOR EQUIVALENT BEARING LOAD CALCULATION | ||
| Parameter | Waarde | Beschrijving |
| f0 | 15.8 | Berekeningsfactor voor equivalente belastingen |
| Raadpleeg Opmerkingen 1 en 2 hieronder | Aanvullende factoren voor equivalente belastingen | |
| Y1 | 0 | Axiale belastingfactor (enkel, tandem) |
| Y0 | 0.46 | Axiale belastingfactor (enkel, tandem) |
| X1 | 1 | Radiale belastingfactor (enkel, tandem) |
| X2 | 0.44 | Radiale belastingfactor (enkel, tandem) |
| X0 | 0.5 | Radiale belastingfactor (enkel, tandem) |
| Y0 | 0.92 | Axiale belastingfactor (X- of O-opstelling) |
| X1 | 1 | Radiale belastingfactor (X- of O-opstelling) |
| X2 | 0.72 | Radiale belastingfactor (X- of O-opstelling) |
| X0 | 1 | Radiale belastingfactor (X- of O-opstelling) |
Onze producten leveren wij zorgvuldig en robuust verpakt in de gehele Benelux.
Elke bestelling wordt met uiterste zorg verpakt om ervoor te zorgen dat jouw bestelling
snel, duurzaam en in perfecte staat arriveert.
Onze betrouwbare verzendpartners zorgen voor een snelle en probleemloze levering in de gehele Benelux. Mocht er toch iets niet geheel naar wens zijn verlopen, laat het ons zo spoedig mogelijk weten.
Ondanks onze grote zorg kan het helaas voorkomen dat je bestelling niet helemaal naar wens is. Geen zorgen, je kunt eenvoudig het retourformulier invullen om je bestelling terug te sturen. Dit geldt ook als je per ongeluk het verkeerde product hebt besteld – we helpen je graag met een snelle en soepele retourprocedure. Dit begint met het invullen van het retourformulier. Klik hier om te starten.
Onze retourvoorwaarden staan vermeld in onze Terms and Conditions.
Ook staan veel voorkomende vragen in de Frequently asked questions.
Unfortunately, despite our great care, it may happen that your order is not completely satisfactory. Don't worry, you can easily fill out the return form to return your order. This also applies if you have accidentally ordered the wrong product - we are happy to help you with a quick and smooth return process. This starts with filling out the return form. Click here to start.
Our return policy is listed in our Terms and Conditions.
Also are common quetions included in the Frequently asked questions.
Out of stock
Oorspronkelijke prijs was: € 622,31.€ 199,14Huidige prijs is: € 199,14. incl.: € 240,96In stock
Oorspronkelijke prijs was: € 382,13.€ 122,28Huidige prijs is: € 122,28. incl.: € 147,96Out of stock
Oorspronkelijke prijs was: € 303,07.€ 136,38Huidige prijs is: € 136,38. incl.: € 165,02
Ball Bearings
Roller bearings
Spherical roller bearings![Toroidal roller bearings [CARB]](https://thegearhub.eu/wp-content/uploads/2023/11/Toroidal-roller-bearing_Menu-150x150.jpg)
Toroidal roller bearings [CARB]
Cylindrical roller bearings
Needle roller bearings
Tapered roller bearings
Washers
Combined needle roller / angular contact ball bearings
Combined needle roller / cylindrical roller thrust bearings
Combined needle roller / thrust ball bearings
Track rollers
Thrust bearings
Plain bearings
Spherical plain bearings and rod ends
Mounted bearings and housings
Super-precision bearings
Bearings accessories
Agricultural bearings
Deep Groove Ball Bearings
Insert Bearings
Angular Contact Ball Bearings
Self-aligning ball bearings
Ball thrust roller
Cylindrical thrust roller
Needle thrust roller
Spherical thrust roller
Cam rollers (Yoke-type track rollers)
Cam followers (Stud-type track rollers)
Support rollers (Yoke-type track rollers)
Combined needle roller / thrust ball bearings
Super precision-cylindrical-roller-bearings
Super precision-angular-contact-thrust-ball-bearings
Pillow block
Flanged square
Flanged Oval
Flanged Round
3-bolt bracket
Triangular
Pillow block housing only
Flanged Square housing only
Flanged Oval housing only
Flanged Round housing only
Take-up housing only
Plummer (pillow) block (split)
Plummer/pillow block (split)
Flanged non-split housing Square & Triangle
Roller Bearing Units
Deep groove ball bearings
Angular contact ball bearings
Inner rings
Outer rings
Tapered roller thrust bearings
Cam rollers (Yoke-type track rollers)
Bushings, thrust washers and strips
Radial spherical plain bearings
Rod ends
Angular contact spherical plain bearings
Ball bearing units
Housings for insert bearings
Bearing housings
Bearing housing accessories
Bearing unit accessories
Super-precision angular contact ball bearings
Super-precision angular contact thrust ball bearings
Lock nuts and locking devices
Adapter sleeves
Withdrawal sleeves
Sphered seat washers
Angle rings (L-shaped thrust collars)
Cylindrical rollers
Miniature ball bearings