Oorspronkelijke prijs was: € 8,16.€ 2,45Huidige prijs is: € 2,45. incl.: € 2,96
608-2RSH SKF | EAN: 7316571844084 | (GTIN14: 07316571844084) ALSO KNOWN GTIN: 7316571844077
116 op voorraad
Binnen enkele seconden geverifieerd om op factuur te kunnen betalen.
Single row deep groove ball bearings with seals on one or both sides are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
| Gewicht | 0,0141 kg |
|---|---|
| Afmetingen | 6 × 6 × 0,9 cm |
| Structure group name |
Deep groove ball bearings |
| Short description |
Deep groove ball bearing with seals |
| Brand |
SKF |
| Pack Code |
Single package |
| EAN code |
7316571844084 |
| Pack gross weight |
14.1 g |
| Pack height |
60 mm |
| Pack length |
60 mm |
| Pack width |
9 mm |
| Pack volume |
32.4 cm3 |
| Product net weight |
11.9 g |
| Products per pack |
1 |
| UNSPSC code UNSPSC is a taxonomy of products and services for use in eCommerce, managed by GS1 US. It is a four-level hierarchy coded as an eight-digit number, two digits for each of the four hierarchical levels. |
31-17-15-04 |
| UNSPSC name |
Ball bearings |
| eClass code A eClass-code is a worldwide reference-data standard for the classification and unambiguous description of products and services established in industry, commerce, trade, and the service sector. eClass consists of a four-level hierarchy of classification classes (i.e. a tree structure). 8-digit class code (in ECLASS called: CodedName) consists of two digits for each of the four hierarchical levels. |
23-05-08-01 |
| eClass name |
Deep groove ball bearing |
| Bore diameter Inner diameter of the bearing |
8 mm |
| Outside diameter |
22 mm |
| Width |
7 mm |
| Radial internal clearance Bearing internal clearance is defined as the total distance through which one bearing ring can be moved relative to the other in the radial direction (radial internal clearance) or in the axial direction (axial internal clearance) |
CN Normal internal clearance (C Normal) |
| Sealing type |
Contact |
| Sealing |
Seal on both sides |
| Basic dynamic load rating The basic dynamic load rating Cr or Ca is the load which a bearing can theoretically endure for a basic rating life of one million revolutions. This is expressed as pure radial (Cr) load for radial bearings and pure axial (Ca) load for thrust bearings |
3.45 kN |
| Basic static load rating The basic static load rating C0r or C0a is defined as the load that results in a certain value of contact stress at the centre of contact of the most heavily loaded rolling element/raceway. C0r is indicate for radial load-, C0a is indicate for radial load rating. |
1.37 kN |
| Limiting speed |
22000 r/min |
| Bore type |
Cylindrical |
| Cage Steel cages can be used at operating temperatures up to 300 °C (570 °F) Sheet steel cages Stamped sheet steel cages are made of low carbon steel / Machined steel cages: Machined steel cages are normally made of non-alloyed structural steel / Brass Cages, Brass cages can be used at operating temperatures up to 250 °C (480 °F). / Sheet brass cages: Stamped sheet brass cages are used for some small and medium-size bearings / Machined brass cages: Most brass cages are machined from cast or wrought brass |
Sheet metal |
| Lubricant |
Grease |
| Number of rows |
1 |
| Relubrication feature |
Without |
| Tolerance class |
Normal |
| Matched arrangement Angular contact ball bearing can be arrangement in different sets. ----- Back-to-back (O) or Face-to-Face (X) or Tandem (>>) ----- The O- and X-arrangements of two precision angular contact ball bearings makes it possible to take up axial loads in both directions. High axial loads in only one direction are supported by a tandem arrangement. |
No |
| Filling slots |
Without |
| Coating |
Without |
| Material bearing |
Bearing steel |
| SKF performance class |
SKF Explorer |
| Afmetingen | ||
| Eigenschap naam | Waarde | |
|---|---|---|
| Boring | 8 mm | |
| Buitendiameter | 22 mm | |
| Breedte | 7 mm | |
| Prestaties | ||
| Eigenschap naam | Waarde | |
| Dynamisch draaggetal | 3.45 kN | |
| Statisch draaggetal | 1.37 kN | |
| Grenstoerental | 22 000 r/min | |
| SKF prestatieklasse | SKF Explorer | |
| Eigenschappen | ||
| Eigenschap naam | Waarde | |
| Vulopeningen | Zonder | |
| Aantal rijen | 1 | |
| Positiekenmerk, lagerbuitenring | Geen | |
| Type boring | Cilindrisch | |
| Kooi | Plaatmetaal | |
| Gepaarde opstelling | Nee | |
| Radiale speling | CN | |
| Materiaal, lager | Lagerstaal | |
| Coating | Zonder | |
| Afdichtingen | Afdichting aan beide zijden | |
| Type afdichting | Contact | |
| Smeermiddel | Vet | |
| Nasmeer kenmerk | Zonder | |
| Logistiek | ||
| Eigenschap naam | Waarde | |
| Nettogewicht van het product | 0.0119 kg | |
| eClass code | 23-05-08-01 | |
| UNSPSC-code | 31171504 | |
| Afmetingen | ||
| Parameter | Waarde | Beschrijving |
|---|---|---|
| d | 8 mm | Boring |
| tΔdmp | -0.007 – 0 mm | Deviation limits of mid-range bore diameter |
| D | 22 mm | Buitendiameter |
| tΔDmp | -0.008 – 0 mm | Deviation limits of mid-range outside diameter |
| B | 7 mm | Breedte |
| tΔBs | -0.06 – 0 mm | Deviation limits of ring width |
| d2 | ≈ 10.55 mm | Uitsparingsdiameter |
| D2 | ≈ 19.2 mm | Uitsparingsdiameter |
| r1,2 | min. 0.3 mm | Afmeting afschuining |
| P6 and tighter width tolerance | ISO tolerance class for dimensions | |
|
Afmetingen SKF-608-2RSH |
Inbouwmaten SKF-608-2RSH |
|
| Inbouwmaten | ||
| Parameter | Waarde | Beschrijving |
| da | min. 10 mm | Diameter aanlegvlak as |
| da | max. 10.5 mm | Diameter aanlegvlak as |
| Da | max. 20 mm | Diameter aanlegvlak lagerhuis |
| ra | max. 0.3 mm | Afrondingsstraal as of lagerhuis |
| Berekeningsgegevens | ||
| Parameter | Waarde | Beschrijving |
| SKF Explorer | SKF prestatieklasse | |
| C | 3.45 kN | Dynamisch draaggetal |
| C0 | 1.37 kN | Statisch draaggetal |
| Pu | 0.057 kN | Vermoeiingsbelastinggrens |
| 22 000 r/min | Grenstoerental | |
| kr | 0.025 | Minimale belastingfactor |
| f0 | 12 | Berekeningsfactor |
| Tolerances of run-out | ||
| Parameter | Waarde | Beschrijving |
| tKia | 4 µm | Range of section height at inner ring of assembled bearing |
| tSd | 7 µm | Maximum run-out of inner ring side face to the bore |
| tSia | 7 µm | Maximum axial run-out of inner ring of assembled bearing |
| tKea | 6 µm | Range of section height at outer ring of assembled bearing |
| tSD | 4 µm | Perpendicularity of outer ring outside surface |
| tSea | 8 µm | Maximum axial run-out of outer ring of assembled bearing |
| P5 | ISO tolerance class for geometrical tolerances | |
Onze producten leveren wij zorgvuldig en robuust verpakt in de gehele Benelux.
Elke bestelling wordt met uiterste zorg verpakt om ervoor te zorgen dat jouw bestelling
snel, duurzaam en in perfecte staat arriveert.
Onze betrouwbare verzendpartners zorgen voor een snelle en probleemloze levering in de gehele Benelux. Mocht er toch iets niet geheel naar wens zijn verlopen, laat het ons zo spoedig mogelijk weten.
Ondanks onze grote zorg kan het helaas voorkomen dat je bestelling niet helemaal naar wens is. Geen zorgen, je kunt eenvoudig het retourformulier invullen om je bestelling terug te sturen. Dit geldt ook als je per ongeluk het verkeerde product hebt besteld – we helpen je graag met een snelle en soepele retourprocedure. Dit begint met het invullen van het retourformulier. Klik hier om te starten.
Onze retourvoorwaarden staan vermeld in onze Terms and Conditions.
Ook staan veel voorkomende vragen in de Frequently asked questions.
Unfortunately, despite our great care, it may happen that your order is not completely satisfactory. Don't worry, you can easily fill out the return form to return your order. This also applies if you have accidentally ordered the wrong product - we are happy to help you with a quick and smooth return process. This starts with filling out the return form. Click here to start.
Our return policy is listed in our Terms and Conditions.
Also are common quetions included in the Frequently asked questions.
In stock
Oorspronkelijke prijs was: € 10,59.€ 3,39Huidige prijs is: € 3,39. incl.: € 4,10In stock
Oorspronkelijke prijs was: € 8,10.€ 2,43Huidige prijs is: € 2,43. incl.: € 2,94In stock
Oorspronkelijke prijs was: € 34,79.€ 11,13Huidige prijs is: € 11,13. incl.: € 13,47In stock
Oorspronkelijke prijs was: € 15,61.€ 5,00Huidige prijs is: € 5,00. incl.: € 6,05In stock
Oorspronkelijke prijs was: € 6,79.€ 2,17Huidige prijs is: € 2,17. incl.: € 2,63In stock
Oorspronkelijke prijs was: € 124,58.€ 39,87Huidige prijs is: € 39,87. incl.: € 48,24In stock
Oorspronkelijke prijs was: € 31,36.€ 14,11Huidige prijs is: € 14,11. incl.: € 17,07In stock
Oorspronkelijke prijs was: € 66,25.€ 29,81Huidige prijs is: € 29,81. incl.: € 36,07
Ball Bearings
Roller bearings
Spherical roller bearings![Toroidal roller bearings [CARB]](https://thegearhub.eu/wp-content/uploads/2023/11/Toroidal-roller-bearing_Menu-150x150.jpg)
Toroidal roller bearings [CARB]
Cylindrical roller bearings
Needle roller bearings
Tapered roller bearings
Washers
Combined needle roller / angular contact ball bearings
Combined needle roller / cylindrical roller thrust bearings
Combined needle roller / thrust ball bearings
Track rollers
Thrust bearings
Plain bearings
Spherical plain bearings and rod ends
Mounted bearings and housings
Super-precision bearings
Bearings accessories
Agricultural bearings
116 op voorraad
Deep Groove Ball Bearings
Insert Bearings
Angular Contact Ball Bearings
Self-aligning ball bearings
Ball thrust roller
Cylindrical thrust roller
Needle thrust roller
Spherical thrust roller
Cam rollers (Yoke-type track rollers)
Cam followers (Stud-type track rollers)
Support rollers (Yoke-type track rollers)
Combined needle roller / thrust ball bearings
Super precision-cylindrical-roller-bearings
Super precision-angular-contact-thrust-ball-bearings
Pillow block
Flanged square
Flanged Oval
Flanged Round
3-bolt bracket
Triangular
Pillow block housing only
Flanged Square housing only
Flanged Oval housing only
Flanged Round housing only
Take-up housing only
Plummer (pillow) block (split)
Plummer/pillow block (split)
Flanged non-split housing Square & Triangle
Roller Bearing Units
Deep groove ball bearings
Angular contact ball bearings
Inner rings
Outer rings
Tapered roller thrust bearings
Cam rollers (Yoke-type track rollers)
Bushings, thrust washers and strips
Radial spherical plain bearings
Rod ends
Angular contact spherical plain bearings
Ball bearing units
Housings for insert bearings
Bearing housings
Bearing housing accessories
Bearing unit accessories
Super-precision angular contact ball bearings
Super-precision angular contact thrust ball bearings
Lock nuts and locking devices
Adapter sleeves
Withdrawal sleeves
Sphered seat washers
Angle rings (L-shaped thrust collars)
Cylindrical rollers
Miniature ball bearings