Oorspronkelijke prijs was: € 1.347,67.€ 431,25Huidige prijs is: € 431,25. incl.: € 521,81
22320EK/C3 SKF | EAN: 7316570705362 | (GTIN14: 07316570705362)
7 op voorraad
Binnen enkele seconden geverifieerd om op factuur te kunnen betalen.
Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.
| Gewicht | 12,71 kg |
|---|---|
| Afmetingen | 8,1 × 23 × 23,1 cm |
| Structure group name |
Spherical roller bearings |
| Short description |
Spherical roller bearing with tapered bore and relubrication features |
| Brand |
SKF |
| Pack Code |
Single package |
| EAN code |
7316570705362 |
| Pack gross weight |
12.71 kg |
| Pack height |
81 mm |
| Pack length |
230 mm |
| Pack width |
231 mm |
| Pack volume |
4.304 dm3 |
| Product net weight |
12.61 kg |
| Products per pack |
1 |
| UNSPSC code UNSPSC is a taxonomy of products and services for use in eCommerce, managed by GS1 US. It is a four-level hierarchy coded as an eight-digit number, two digits for each of the four hierarchical levels. |
31-17-15-10 |
| UNSPSC name |
Spherical bearings |
| eClass code A eClass-code is a worldwide reference-data standard for the classification and unambiguous description of products and services established in industry, commerce, trade, and the service sector. eClass consists of a four-level hierarchy of classification classes (i.e. a tree structure). 8-digit class code (in ECLASS called: CodedName) consists of two digits for each of the four hierarchical levels. |
23-05-09-11 |
| eClass name |
Spherical roller bearing |
| Bore diameter Inner diameter of the bearing |
100 mm |
| Outside diameter |
215 mm |
| Width |
73 mm |
| Radial internal clearance Bearing internal clearance is defined as the total distance through which one bearing ring can be moved relative to the other in the radial direction (radial internal clearance) or in the axial direction (axial internal clearance) |
C3 Internal clearance larger than CN |
| Sealing |
Without |
| Basic dynamic load rating The basic dynamic load rating Cr or Ca is the load which a bearing can theoretically endure for a basic rating life of one million revolutions. This is expressed as pure radial (Cr) load for radial bearings and pure axial (Ca) load for thrust bearings |
847 kN |
| Basic static load rating The basic static load rating C0r or C0a is defined as the load that results in a certain value of contact stress at the centre of contact of the most heavily loaded rolling element/raceway. C0r is indicate for radial load-, C0a is indicate for radial load rating. |
950 kN |
| Limiting speed |
3000 r/min |
| Reference speed |
2400 r/min |
| Bore type |
Tapered 1:12 |
| Cage Steel cages can be used at operating temperatures up to 300 °C (570 °F) Sheet steel cages Stamped sheet steel cages are made of low carbon steel / Machined steel cages: Machined steel cages are normally made of non-alloyed structural steel / Brass Cages, Brass cages can be used at operating temperatures up to 250 °C (480 °F). / Sheet brass cages: Stamped sheet brass cages are used for some small and medium-size bearings / Machined brass cages: Most brass cages are machined from cast or wrought brass |
Sheet metal |
| Locating feature outer ring |
Without |
| Number of rows |
2 |
| Relubrication feature |
With |
| Tolerance class |
Normal |
| SKF performance class |
SKF Explorer |
| Afmetingen | ||
| Eigenschap naam | Waarde | |
|---|---|---|
| Boring | 100 mm | |
| Buitendiameter | 215 mm | |
| Breedte | 73 mm | |
| Prestaties | ||
| Eigenschap naam | Waarde | |
| Dynamisch draaggetal | 847 kN | |
| Statisch draaggetal | 950 kN | |
| Referentietoerental | 2 400 r/min | |
| Grenstoerental | 3 000 r/min | |
| SKF prestatieklasse | SKF Explorer | |
| Eigenschappen | ||
| Eigenschap naam | Waarde | |
| Aantal rijen | 2 | |
| Positiekenmerk, lagerbuitenring | Zonder | |
| Type boring | Conisch 1:12 | |
| Kooi | Plaatmetaal | |
| Radiale speling | C3 | |
| Tolerantieklasse afmetingen | Normaal | |
| Tolerantieklasse slingering | P5 | |
| Afdichtingen | Zonder | |
| Smeermiddel | Geen | |
| Nasmeer kenmerk | Met | |
| Reconditionering mogelijk | Ja | |
| Logistiek | ||
| Eigenschap naam | Waarde | |
| Nettogewicht van het product | 12.6 kg | |
| eClass code | 23-05-09-11 | |
| UNSPSC-code | 31171510 | |
| Beschrijving | Waarde | |
|---|---|---|
| Type boring | Conisch 1:12 | |
| Afmetingen | ||
| Parameter | Waarde | Beschrijving |
| d | 100 mm | Boring |
| tΔdmp | 0 – 0.035 mm | Deviation limits of mid-range bore diameter |
| tΔSL | 0 – 0.035 mm | Deviation limits of tapered slope |
| D | 215 mm | Buitendiameter |
| tΔDmp | -0.03 – 0 mm | Deviation limits of mid-range outside diameter |
| B | 73 mm | Breedte |
| tΔBs | -0.08 – 0 mm | Deviation limits of ring width |
| d2 | ≈ 130 mm | Diameter asborst binnenring |
| D1 | ≈ 184 mm | Diameter schouder/uitsparing buitenring |
| b | 11.1 mm | Breedte smeergroef |
| K | 6 mm | Diameter smeergat |
| r1,2 | min. 3 mm | Afmeting afschuining |
| Normaal | ISO tolerance class for dimensions | |
|
Afmetingen SKF-22320-EK/C3 |
Inbouwmaten SKF-22320-EK/C3 |
|
| Inbouwmaten | ||
| Parameter | Waarde | Beschrijving |
| Da | max. 201 mm | Diameter aanlegvlak lagerhuis |
| ra | max. 2.5 mm | Afrondingsstraal |
| Berekeningsgegevens | ||
| Parameter | Waarde | Beschrijving |
| SKF Explorer | SKF prestatieklasse | |
| C | 847 kN | Dynamisch draaggetal |
| C0 | 950 kN | Statisch draaggetal |
| Pu | 88 kN | Vermoeiingsbelastinggrens |
| 2 400 r/min | Referentietoerental | |
| 3 000 r/min | Grenstoerental | |
| e | 0.33 | Grenswaarde |
| Y1 | 2 | Berekeningsfactor |
| Y2 | 3 | Berekeningsfactor |
| Y0 | 2 | Berekeningsfactor |
| Tolerances of run-out | ||
| Parameter | Waarde | Beschrijving |
| tKia | 6 µm | Range of section height at inner ring of assembled bearing |
| tSd | 9 µm | Maximum run-out of inner ring side face to the bore |
| tKea | 15 µm | Range of section height at outer ring of assembled bearing |
| tSD | 5.5 µm | Perpendicularity of outer ring outside surface |
| P5 | ISO tolerance class for geometrical tolerances | |
| Radiale speling | ||
| Beschrijving | Waarde | |
| Minimum initial clearance | 110 µm | |
| Maximum initial clearance | 140 µm | |
Onze producten leveren wij zorgvuldig en robuust verpakt in de gehele Benelux.
Elke bestelling wordt met uiterste zorg verpakt om ervoor te zorgen dat jouw bestelling
snel, duurzaam en in perfecte staat arriveert.
Onze betrouwbare verzendpartners zorgen voor een snelle en probleemloze levering in de gehele Benelux. Mocht er toch iets niet geheel naar wens zijn verlopen, laat het ons zo spoedig mogelijk weten.
Ondanks onze grote zorg kan het helaas voorkomen dat je bestelling niet helemaal naar wens is. Geen zorgen, je kunt eenvoudig het retourformulier invullen om je bestelling terug te sturen. Dit geldt ook als je per ongeluk het verkeerde product hebt besteld – we helpen je graag met een snelle en soepele retourprocedure. Dit begint met het invullen van het retourformulier. Klik hier om te starten.
Onze retourvoorwaarden staan vermeld in onze Terms and Conditions.
Ook staan veel voorkomende vragen in de Frequently asked questions.
Unfortunately, despite our great care, it may happen that your order is not completely satisfactory. Don't worry, you can easily fill out the return form to return your order. This also applies if you have accidentally ordered the wrong product - we are happy to help you with a quick and smooth return process. This starts with filling out the return form. Click here to start.
Our return policy is listed in our Terms and Conditions.
Also are common quetions included in the Frequently asked questions.
Ball Bearings
Roller bearings
Spherical roller bearings![Toroidal roller bearings [CARB]](https://thegearhub.eu/wp-content/uploads/2023/11/Toroidal-roller-bearing_Menu-150x150.jpg)
Toroidal roller bearings [CARB]
Cylindrical roller bearings
Needle roller bearings
Tapered roller bearings
Washers
Combined needle roller / angular contact ball bearings
Combined needle roller / cylindrical roller thrust bearings
Combined needle roller / thrust ball bearings
Track rollers
Thrust bearings
Plain bearings
Spherical plain bearings and rod ends
Mounted bearings and housings
Super-precision bearings
Bearings accessories
Agricultural bearings
7 op voorraad
Deep Groove Ball Bearings
Insert Bearings
Angular Contact Ball Bearings
Self-aligning ball bearings
Ball thrust roller
Cylindrical thrust roller
Needle thrust roller
Spherical thrust roller
Cam rollers (Yoke-type track rollers)
Cam followers (Stud-type track rollers)
Support rollers (Yoke-type track rollers)
Combined needle roller / thrust ball bearings
Super precision-cylindrical-roller-bearings
Super precision-angular-contact-thrust-ball-bearings
Pillow block
Flanged square
Flanged Oval
Flanged Round
3-bolt bracket
Triangular
Pillow block housing only
Flanged Square housing only
Flanged Oval housing only
Flanged Round housing only
Take-up housing only
Plummer (pillow) block (split)
Plummer/pillow block (split)
Flanged non-split housing Square & Triangle
Roller Bearing Units
Deep groove ball bearings
Angular contact ball bearings
Inner rings
Outer rings
Tapered roller thrust bearings
Cam rollers (Yoke-type track rollers)
Bushings, thrust washers and strips
Radial spherical plain bearings
Rod ends
Angular contact spherical plain bearings
Ball bearing units
Housings for insert bearings
Bearing housings
Bearing housing accessories
Bearing unit accessories
Super-precision angular contact ball bearings
Super-precision angular contact thrust ball bearings
Lock nuts and locking devices
Adapter sleeves
Withdrawal sleeves
Sphered seat washers
Angle rings (L-shaped thrust collars)
Cylindrical rollers
Miniature ball bearings