S7010CEGA/P4A SKF | EAN: 7316575990640 | (GTIN14: 07316575990640)
Binnen enkele seconden geverifieerd om op factuur te kunnen betalen.
These super-precision, high-speed, E design, single row angular contact ball bearings, with seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed for high-speed operation and, compared to SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads. Being universally matchable, they can be used together in arrangements to provide effective load sharing, without the use of shims or similar devices.
| Gewicht | 0,283 kg |
|---|---|
| Afmetingen | 8,5 × 8,3 × 2,5 cm |
| Structure group name |
Super-precision angular contact ball bearings |
| Short description |
high speed ,E design ,Super-precision ,universally matchable single row angular contact ball bearing with non-contact seals on both sides |
| Brand |
SKF |
| Pack Code |
Single package |
| EAN code |
7316575990640 |
| Pack gross weight |
0.283 kg |
| Pack height |
85 mm |
| Pack length |
83 mm |
| Pack width |
25 mm |
| Pack volume |
176.375 cm3 |
| Product net weight |
0.264 kg |
| Products per pack |
1 |
| UNSPSC code UNSPSC is a taxonomy of products and services for use in eCommerce, managed by GS1 US. It is a four-level hierarchy coded as an eight-digit number, two digits for each of the four hierarchical levels. |
31-17-15-31 |
| UNSPSC name |
Angular contact bearing |
| eClass code A eClass-code is a worldwide reference-data standard for the classification and unambiguous description of products and services established in industry, commerce, trade, and the service sector. eClass consists of a four-level hierarchy of classification classes (i.e. a tree structure). 8-digit class code (in ECLASS called: CodedName) consists of two digits for each of the four hierarchical levels. |
23-05-08-04 |
| eClass name |
Spindle bearing |
| Bore diameter Inner diameter of the bearing |
50 mm |
| Outside diameter |
80 mm |
| Width |
16 mm |
| Sealing type |
Non-contact |
| Sealing |
Seal on both sides |
| Basic dynamic load rating The basic dynamic load rating Cr or Ca is the load which a bearing can theoretically endure for a basic rating life of one million revolutions. This is expressed as pure radial (Cr) load for radial bearings and pure axial (Ca) load for thrust bearings |
15.6 kN |
| Basic static load rating The basic static load rating C0r or C0a is defined as the load that results in a certain value of contact stress at the centre of contact of the most heavily loaded rolling element/raceway. C0r is indicate for radial load-, C0a is indicate for radial load rating. |
10.6 kN |
| Lubricant |
Grease |
| Tolerance class |
P4A |
| Contact angle The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis |
15° |
| Matched arrangement Angular contact ball bearing can be arrangement in different sets. ----- Back-to-back (O) or Face-to-Face (X) or Tandem (>>) ----- The O- and X-arrangements of two precision angular contact ball bearings makes it possible to take up axial loads in both directions. High axial loads in only one direction are supported by a tandem arrangement. |
No |
| Contact type |
Normal contact (two-point contact) |
| Matched(ax.clearance/preload |
class A ,Measuring load |
| Coating |
Without |
| Material bearing |
Bearing steel |
| Afmetingen | ||
| Feature Name | Value | |
|---|---|---|
| Boring | 50 mm | |
| Buitendiameter | 80 mm | |
| Breedte | 16 mm | |
| Contacthoek | 15 ° | |
| Prestaties | ||
| Feature Name | Value | |
| Dynamisch draaggetal | 15.6 kN | |
| Statisch draaggetal | 10.6 kN | |
| Opmerking | Neem contact op met SKF voor de mogelijke toerentallen | |
| Eigenschappen | ||
| Feature Name | Value | |
| Contacttype | Normaal contact (tweepuntscontact) | |
| Aantal rijen | 1 | |
| Type ring | Binnen- en buitenringen uit één stuk | |
| Ontwerp | Hogesnelheid E | |
| Universeel gepaard lager | Ja, O-opstelling (), X-opstelling (>>) | |
| Gepaarde opstelling | Nee | |
| Gepaarde conditie (axiale speling/voorspanning) | Belasting meten, klasse A | |
| Tolerantieklasse | P4A | |
| Materiaal, lager | Lagerstaal | |
| Coating | Zonder | |
| Afdichtingen | Afdichting aan beide zijden | |
| Type afdichting | Niet-slepend | |
| Smeermiddel | Vet | |
| Indicative product carbon footprint to manufacture | 0.95 kg CO2e | |
| Logistiek | ||
| Feature Name | Value | |
| Nettogewicht van het product | 0.264 kg | |
| eClass code | 23-05-08-04 | |
| UNSPSC-code | 31171531 | |
| Beschrijving | Waarde | |
|---|---|---|
| Universeel gepaard(e) lager(s) | Ja, O-opstelling (), X-opstelling (>>) | |
| Afmetingen | ||
| Parameter | Waarde | Beschrijving |
| d | 50 mm | Boring |
| D | 80 mm | Buitendiameter |
| B | 16 mm | Breedte |
| d1 | 60.25 mm | Diameter asborst binnenring (groot zijvlak) |
| d2 | 57.9 mm | Diameter asborst binnenring (klein zijvlak) |
| D2 | 72.9 mm | Uitsparingsdiameter buitenring (groot zijvlak) |
| r1,2 | min. 1 mm | Afmeting afschuining |
| r3,4 | min. 0.6 mm | Afmeting afschuining |
| a | 16.8 mm | Afstand van zijvlak tot drukpunt |
|
Afmetingen SKF-S7010-CEGA/P4A |
Inbouwmaten SKF-S7010-CEGA/P4A |
|
| Inbouwmaten | ||
| Parameter | Waarde | Beschrijving |
| da | min. 54.6 mm | Diameter aanlegvlak as |
| da | max. 59.7 mm | Diameter aanlegvlak as |
| db | min. 54.6 mm | Diameter aanlegvlak as |
| db | max. 57.3 mm | Diameter aanlegvlak as |
| Da | max. 75.4 mm | Diameter aanlegvlak lagerhuis |
| Db | max. 75.8 mm | Diameter aanlegvlak lagerhuis |
| ra | max. 1 mm | Afrondingsstraal |
| rb | max. 0.6 mm | Afrondingsstraal |
| Berekeningsgegevens | ||
| Parameter | Waarde | Beschrijving |
| C | 15.6 kN | Dynamisch draaggetal |
| C0 | 10.6 kN | Statisch draaggetal |
| Pu | 0.45 kN | Vermoeiingsbelastinggrens |
| To be calculated: Single bearing (25000) x speed reduction factor (see table below) | Bereikbaar toerental voor vetsmering | |
| To be calculated: Single bearing () x speed reduction factor (see table below) | Bereikbaar toerental voor olie-luchtsmering | |
| α | 15 ° | Contacthoek |
| Dw | 7.938 mm | Kogeldiameter |
| i | 1 | Aantal rijen |
| z | 21 | Aantal kogels (per lager) |
| VOORSPANNING EN STIJFHEID (X- OF O-OPSTELLING) | ||
| Parameter | Waarde | Beschrijving |
| A | Voorspanningsklasse | |
| G | 85 N | Voorspanning niet-gemonteerd |
| 42 N/µm | Axiale stijfheid | |
| CORRECTION FACTORS FOR PRELOAD CALCULATION | ||
| Parameter | Waarde | Beschrijving |
| f | 1.08 | Correctiefactor is afhankelijk van lagerserie en -afmeting |
| f1 | 1 | Correctiefactor afhankelijk van contacthoek |
| f2A | 1 | Correctiefactor, voorspanning klasse A |
| fHC | 1 | Correctiefactor voor hybride lagers |
| FACTORS FOR EQUIVALENT BEARING LOAD CALCULATION | ||
| Parameter | Waarde | Beschrijving |
| f0 | 8.2 | Berekeningsfactor voor equivalente belastingen |
| Raadpleeg Opmerkingen 1 en 2 hieronder | Aanvullende factoren voor equivalente belastingen | |
| Y0 | 0.92 | Axiale belastingfactor (X- of O-opstelling) |
| X1 | 1 | Radiale belastingfactor (X- of O-opstelling) |
| X2 | 0.72 | Radiale belastingfactor (X- of O-opstelling) |
| X0 | 1 | Radiale belastingfactor (X- of O-opstelling) |
Onze producten leveren wij zorgvuldig en robuust verpakt in de gehele Benelux.
Elke bestelling wordt met uiterste zorg verpakt om ervoor te zorgen dat jouw bestelling
snel, duurzaam en in perfecte staat arriveert.
Onze betrouwbare verzendpartners zorgen voor een snelle en probleemloze levering in de gehele Benelux. Mocht er toch iets niet geheel naar wens zijn verlopen, laat het ons zo spoedig mogelijk weten.
Ondanks onze grote zorg kan het helaas voorkomen dat je bestelling niet helemaal naar wens is. Geen zorgen, je kunt eenvoudig het retourformulier invullen om je bestelling terug te sturen. Dit geldt ook als je per ongeluk het verkeerde product hebt besteld – we helpen je graag met een snelle en soepele retourprocedure. Dit begint met het invullen van het retourformulier. Klik hier om te starten.
Onze retourvoorwaarden staan vermeld in onze Terms and Conditions.
Ook staan veel voorkomende vragen in de Frequently asked questions.
Unfortunately, despite our great care, it may happen that your order is not completely satisfactory. Don't worry, you can easily fill out the return form to return your order. This also applies if you have accidentally ordered the wrong product - we are happy to help you with a quick and smooth return process. This starts with filling out the return form. Click here to start.
Our return policy is listed in our Terms and Conditions.
Also are common quetions included in the Frequently asked questions.
Out of stock
Oorspronkelijke prijs was: € 986,73.€ 315,75Huidige prijs is: € 315,75. incl.: € 382,06Out of stock
Oorspronkelijke prijs was: € 942,08.€ 301,47Huidige prijs is: € 301,47. incl.: € 364,78In stock
Oorspronkelijke prijs was: € 480,79.€ 153,85Huidige prijs is: € 153,85. incl.: € 186,16Out of stock
Oorspronkelijke prijs was: € 303,07.€ 136,38Huidige prijs is: € 136,38. incl.: € 165,02
Ball Bearings
Roller bearings
Spherical roller bearings![Toroidal roller bearings [CARB]](https://thegearhub.eu/wp-content/uploads/2023/11/Toroidal-roller-bearing_Menu-150x150.jpg)
Toroidal roller bearings [CARB]
Cylindrical roller bearings
Needle roller bearings
Tapered roller bearings
Washers
Combined needle roller / angular contact ball bearings
Combined needle roller / cylindrical roller thrust bearings
Combined needle roller / thrust ball bearings
Track rollers
Thrust bearings
Plain bearings
Spherical plain bearings and rod ends
Mounted bearings and housings
Super-precision bearings
Bearings accessories
Agricultural bearings
Deep Groove Ball Bearings
Insert Bearings
Angular Contact Ball Bearings
Self-aligning ball bearings
Ball thrust roller
Cylindrical thrust roller
Needle thrust roller
Spherical thrust roller
Cam rollers (Yoke-type track rollers)
Cam followers (Stud-type track rollers)
Support rollers (Yoke-type track rollers)
Combined needle roller / thrust ball bearings
Super precision-cylindrical-roller-bearings
Super precision-angular-contact-thrust-ball-bearings
Pillow block
Flanged square
Flanged Oval
Flanged Round
3-bolt bracket
Triangular
Pillow block housing only
Flanged Square housing only
Flanged Oval housing only
Flanged Round housing only
Take-up housing only
Plummer (pillow) block (split)
Plummer/pillow block (split)
Flanged non-split housing Square & Triangle
Roller Bearing Units
Deep groove ball bearings
Angular contact ball bearings
Inner rings
Outer rings
Tapered roller thrust bearings
Cam rollers (Yoke-type track rollers)
Bushings, thrust washers and strips
Radial spherical plain bearings
Rod ends
Angular contact spherical plain bearings
Ball bearing units
Housings for insert bearings
Bearing housings
Bearing housing accessories
Bearing unit accessories
Super-precision angular contact ball bearings
Super-precision angular contact thrust ball bearings
Lock nuts and locking devices
Adapter sleeves
Withdrawal sleeves
Sphered seat washers
Angle rings (L-shaped thrust collars)
Cylindrical rollers
Miniature ball bearings